LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2003 >> Intrepid SXT >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics >> Diagnostic Tests >> DTC P0632: Odometer Not Programmed In Pcm >> Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC P0632: Odometer Not Programmed In Pcm: Testing

  1. Ignition on, engine not running. With the DRBIII® scan tool, erase DTCs. Using the DRBIII® scan tool, program the mileage into the PCM. Start the engine. Allow the engine to reach normal operating temperature. With the DRBIII® scan tool, read DTCs. Does the DTC reset? If yes, go to next step. If no, the mileage has been successfully programmed into the PCM. Test is complete.
  2. The ignition switch must be left in the off position for a minimum of 10 seconds. Cycle the ignition switch to the off position and then back to run. Attempt to program the PCM with the applicable information. Start the vehicle and allow it to reach normal operating temperatures. With the DRBIII® scan tool, read DTCs. Does the DTC reset? If yes, replace and program the PCM. See PROGRAMMING . If no, the mileage has been successfully programmed into the PCM. Test is complete.
scientia non olet · About LEMON Manuals