Monitored & Set Conditions

NOTE: If a Manifold Absolute Pressure (MAP) High or Low DTC set along with P0106, diagnose the DTC P0107: MAP SENSOR LOW or DTC P0108: MAP SENSOR HIGH first before continuing.

NOTE: For component location, see COMPONENT LOCATIONS . For connector identification, see CONNECTOR IDENTIFICATION . For circuit identification and wiring diagram, see WIRING DIAGRAMS . In testing procedures Alpha/Numeric character in patientness i.e. (K4) designates circuit. After each repair procedure has been completed, reconnect all components. Perform POWERTRAIN VERIFICATION TEST VER-5 under VERIFICATION TESTS to ensure system is functioning properly.

The MAP sensor performance is monitored with engine running and the throttle blade at closed throttle, voltage at a steady value. The DTC is set when too small of a difference is seen between barometric pressure with ignition on (engine running) and manifold vacuum for 2.80 seconds.