LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2003 >> PT Cruiser Base, Standard >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery System >> Thermal Guard >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Thermal Guard: Removal

WARNING: TO PROTECT THE HANDS FROM BATTERY ACID, A SUITABLE PAIR OF HEAVY DUTY RUBBER GLOVES, NOT THE HOUSEHOLD TYPE, SHOULD BE WORN WHEN REMOVING OR SERVICING A BATTERY. SAFETY GLASSES ALSO SHOULD BE WORN.
  1. Make sure ignition switch is in OFF position and all accessories are OFF.
  2. Open hood.
  3. Remove air cleaner housing (Refer to AIR CLEANER HOUSING - REMOVAL ).
  4. Disconnect and isolate the battery negative cable.
  5. Disconnect the battery positive cable.
  6. Loosen bolt and retainer that holds the battery down to the tray.
  7. Lift battery out of battery tray and remove from vehicle.
  8. Carefully lift the thermal guard off over the battery taking care not to tear it.
  9. Remove the thermal guard from battery.
scientia non olet · About LEMON Manuals