September 30: LEMON manuals is back up on a temporary server! Slowness is possible
Starter Does Not Disengage
- Starter Improperly Installed:
Install starter, tighten to correct torque specifications. See STARTER MOTOR
under REMOVAL & INSTALLATION.
- Starter Relay Faulty:
Test or replace if necessary. See STARTER RELAY
under TESTING.
- Ignition Switch Faulty:
Test or replace if necessary.
- Starter Assembly Faulty:
Check components, if check is ok, replace starter assembly.
- Faulty Teeth On Ring Gear:
Inspect teeth, rotate flywheel 360°, replace if damaged.