LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2004 >> Concorde LXi >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Electronic Control Modules >> Electronic Control Modules >> Programming The Skim
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Programming The Skim

  1. Turn the ignition switch on (transmission in park/neutral).
  2. Use the DRB III arid select THEFT ALARM, SKIM then MISCELLANEOUS.
  3. Select PCM REPLACED (GAS ENGINE).
  4. Program the vehicle four-digit PIN into SKIM.
  5. Select COUNTRY CODE and enter the correct country.
    NOTE: Be sure to enter the correct country code. If the incorrect country code is programmed into SKIM, the SKIM must be replaced.
  6. Select YES to update VTN (the SKIM will learn the VIN from the PCM).
  7. Press ENTER to transfer the secret key (the PCM will send the secret key to the SKIM).
  8. Program ignition keys to SKIM.
    NOTE: If the PCM and the SKIM are replaced at the same time, all vehicle keys will need to be replaced and programmed to the new SKIM.
scientia non olet · About LEMON Manuals