5. Fuel Pump

NOTE: Check connectors - It is critical that the connector is free from any signs of corrosion or deformities. Clean/repair as necessary.

With the ignition on.

Using a 12-volt test light connected across the Fuel Pump harness connector.

With the DRB III(R), actuate the Fuel Pump Relay.

Fig 1: Actuating Fuel Pump Relay

Courtesy of DAIMLERCHRYSLER CORP.

Does the test light illuminate brightly?

Yes >> Replace the Fuel Pump. See FUEL SYSTEM article.
See POWERTRAIN VERIFICATION TEST - VER 3 .
No >> Repair the fuel pump ground circuit for an open.
See POWERTRAIN VERIFICATION TEST - VER 3 .