LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2004 >> Crossfire Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Electrical Diagnostics >> Circuit Tests >> Engine Oil Sensor Level Performance >> Diagnostic Test >> 3. 5-Volt Supply Circuit
April 5, 2026: LEMON Manuals is launched! Read the announcement.

3. 5-Volt Supply Circuit

Turn the ignition off.

Disconnect the Oil Sensor harness connector.

NOTE: Check connectors - Clean/repair as necessary.

Turn the ignition on.

Measure the voltage of the 5-Volt Supply circuit at the Oil Sensor harness connector.

Fig 1: Measuring Voltage Of 5-Volt Supply Circuit At Oil Sensor Harness Connector
G01861764Courtesy of DAIMLERCHRYSLER CORP.

Is the voltage between 4.5 to 5.0 volts? 

  1. Yes  >> Go To 7 
  2. No  >> Go To 4
scientia non olet · About LEMON Manuals