LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2004 >> Intrepid SE >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Electronic Control Modules >> Body Control Module >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Body Control Module: Removal

  1. Remove the Junction Block/BCM from the vehicle. Refer to JUNCTION BLOCK .
  2. Remove the four BCM attaching screws from the Junction Block.
  3. Disconnect BCM from the Junction Block.
    NOTE: The Remote Keyless Entry (RKE) module is attached to the BCM with three screws. This must be transferred (if equipped) to the new BCM.
    NOTE: If the BCM is replaced, the Vehicle Theft /Security System (VTSS (if equipped) must be enabled in the new BCM via the DRB III(R) scan tool in order to start the vehicle.
scientia non olet · About LEMON Manuals