Charging System - Generators & Regulators: Programming: Skim
- Turn the ignition switch on (transmission in Park/Neutral).
- Use the DRBIII® and select THEFT ALARM, SKIM then MISCELLANEOUS.
- Select PCM REPLACED (GAS ENGINE).
- Program the vehicle 4-digit PIN into SKIM.
- Select COUNTRY CODE and enter the correct country.
- Select YES to update VIN (the SKIM will learn the VIN from the PCM).
- Press ENTER to transfer the secret key (the PCM will send the secret key to the SKIM).
- Program ignition keys to SKIM.
NOTE:
Be sure to enter the correct country code. If the incorrect country code is programmed into SKIM, the SKIM must be replaced.
NOTE:
If the PCM and the SKIM are replaced at the same time, all vehicle keys will need to be replaced and programmed to the new SKIM.