LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2004 >> Intrepid SXT >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Fuel Injection System >> Fuel Injector >> Removal >> Removal - 2.7L
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal - 2.7L

  1. Release fuel system pressure. Refer to STANDARD PROCEDURE - FUEL SYSTEM PRESSURE RELEASE PROCEDURE .
  2. Disconnect negative cable to battery.
  3. Remove intake manifold plenum. Refer to the appropriate ENGINE 2.7L for information.
  4. Remove intake manifold plenum mounting bolts. Lift Plenum up off of engine. Cover intake manifold to prevent foreign material from entering engine.
  5. Disconnect fuel supply tube quick connect fittings at the rear of intake manifold. Refer to QUICK CONNECT FITTING .
  6. If the injector connectors are not tagged with their cylinder number, tag them to identify the correct cylinder
  7. Remove electrical connectors from the fuel injectors.
  8. Remove fuel rail mounting bolts.
  9. Lift fuel rail straight up off of the cylinder head.
  10. Remove retaining clips from fuel injectors at fuel rail.
  11. Remove fuel injectors.
  12. Repeat for remaining injectors.
  13. Check injector O-ring for damage. If O-ring is damaged, it must be replaced. Replace the injector clip if it is damaged.
scientia non olet · About LEMON Manuals