LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2004 >> Intrepid SXT >> Repair and Diagnosis >> Engine Performance >> System >> Powertrain Diagnostic Procedures >> System Description And Functional Operation >> Functional Operation >> Other Controls >> NVLD Leak Detection >> Rationality Tests
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Rationality Tests

  1. The rationality check of the switch, solenoid and seal will be performed as follows:
    • At key-on, the NVLD solenoid will be energized to vent any vacuum that may be trapped in the evaporative system from the previous soak. This should result in an open switch condition.
    • The solenoid will be de-energized (to seal the system) at the point where purge begins. The system/NVLD component rationality passes for that drive cycle if the switch closes after purge begins.
    • The solenoid is then reenergized for the remainder of the drive cycle.
    • If the switch events are not seen in a certain period of time, the rationality check will have failed (2 trip rule).
  2. Purge Flow:

    The above rationality check is considered sufficient to confirm purge solenoid function and conformance with the purge flow test requirement. The Purge Flow Monitor is passed based on switch activity when purge is turned on or based on a rich fuel control shift when purge is turned on.

scientia non olet · About LEMON Manuals