Removal - 2.4L Turbo

Disconnect the negative battery cable.
Remove the throttle control shield.

Fig 1: Removing Throttle Control Shield
Courtesy of DAIMLERCHRYSLER CORP.
Remove the throttle cables from the throttle body lever.

Fig 2: Removing Throttle Cables
Courtesy of DAIMLERCHRYSLER CORP.
Remove the throttle cable bracket and relocate.

Fig 3: Removing Throttle Cable Bracket
Courtesy of DAIMLERCHRYSLER CORP.
Remove the spark plug cables from the ignition coil.
Unlock and disconnect the electrical connector from the ignition coil.
Remove bolts from ignition coil. Twist coil to remove 2 of the bolts from the coil before removing it from vehicle.

Fig 4: Removing Ignition Coil Bolt
Courtesy of DAIMLERCHRYSLER CORP.
Pull coil up and out by the throttle body side of the intake manifold.

Fig 5: Removing & Installing Ignition Coil
Courtesy of DAIMLERCHRYSLER CORP.

Fig 6: Identifying Removed Ignition Coil
Courtesy of DAIMLERCHRYSLER CORP.