LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2004 >> Pacifica AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Wheel Speed Sensor Front >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Wheel Speed Sensor Front: Removal

  1. Access and remove front brake rotor. (Refer to DISC ).
  2. Disconnect vehicle wiring harness from wheel speed sensor connector (Fig 1 ).
    Fig 1: Disconnecting Vehicle Wiring Harness From Wheel Speed Sensor Connector
    G03571347Courtesy of DAIMLERCHRYSLER CORP.
  3. Unclip wheel speed sensor connector from frame rail outer reinforcement, then open routing clip on reinforcement and remove cable (Fig 1 ).
  4. Remove screw fastening wheel speed sensor routing bracket to strut assembly (Fig 2 ).
    Fig 2: Removing Wheel Speed Sensor Mounting From Strut
    G03571348Courtesy of DAIMLERCHRYSLER CORP.
  5. Open routing clip at knuckle and remove wheel speed sensor cable (Fig 3 ).
    CAUTION: Prior to removal, clean area around sensor head to help prevent contaminants from entering bearing when sensor head is removed.
  6. Remove screw fastening speed sensor head to hub and bearing (Fig 3 ).
  7. Remove wheel speed sensor from hub and bearing.
    Fig 3: Removing Sensor Mounting From Front Hub And Bearing
    G03571349Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals