LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2004 >> Pacifica FWD >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Delivery System >> Fuel Tank >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Tank: Installation

  1. Support the fuel tank with a transmission jack.
  2. Raise fuel tank and install to vehicle. See Figure.
  3. Install the 2 fuel tank straps. See Figure.
  4. Install the fuel filler tube to the rubber hose at fuel tank. See Figure.
  5. Connect the vapor recirculation tube. See Figure.
  6. Connect the fuel line and EVAP line.
  7. Connect the fuel tank electrical connector. See Figure.
  8. Support driveshaft on jack.
  9. Install the driveshaft support/bearing. See Figure.
  10. Align the Marks on the driveshaft to the rear connection.
  11. Connect the driveshaft rear connection. See Figure.
  12. Install the exhaust system and tighten clamp.
  13. Install the center exhaust hanger rubber grommets. See Figure.
  14. Install muffler hanger rubber grommets. See Figure.
  15. Install the left rear tire.
  16. Lower vehicle.
  17. Connect the negative battery cable.
  18. Fill fuel tank. Use the DRBIII® scan tool to pressurize the fuel system. Check for leaks.
scientia non olet · About LEMON Manuals