LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2004 >> Pacifica FWD >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Control >> Key/Lock Cylinder >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Key/Lock Cylinder: Installation

  1. Install key in lock cylinder. Turn key to "ON" position (retaining tab on lock cylinder can be depressed).
  2. The shaft at the end of the lock cylinder aligns with the socket in the end of the housing. To align the socket with the lock cylinder, ensure the socket is in the "ON" position.
  3. Align the lock cylinder with the grooves in the housing. Slide the lock cylinder into the housing until the tab sticks through the opening in the housing.
  4. Turn key to Off position. Remove key.
  5. Install center console bezel to instrument panel (Figure).
  6. Install bezel ignition switch ring.
  7. Connect the negative battery cable.
scientia non olet · About LEMON Manuals