General Information: Notes
NOTE:
(NGC)
The 2004 CS is equipped with the Powertrain Control Module and Transmission Control Module combined in a single control module. This module is the Next Generation Controller (NGC) for DaimlerChrysler and will be referred to as the Powertrain Control Module (PCM).
The PCM has four color coded connectors C1 through C4, (C1 - BLK, C2 - ORANGE, C3 -WHITE, C4 - GREEN), with each connector containing 38 pins.
Two tools are required to diagnose and repair the PCM terminals and harness connectors:
The 2004 CS is equipped with the Powertrain Control Module and Transmission Control Module combined in a single control module. This module is the Next Generation Controller (NGC) for DaimlerChrysler and will be referred to as the Powertrain Control Module (PCM).
The PCM has four color coded connectors C1 through C4, (C1 - BLK, C2 - ORANGE, C3 -WHITE, C4 - GREEN), with each connector containing 38 pins.
Two tools are required to diagnose and repair the PCM terminals and harness connectors:
- Miller #3638 Terminal Removal Pick must be used to release the connector terminals or harness and connector damage will occur.
- Miller #8815 Pinout Box must be used to probe the PCM terminals or terminal damage will occur.