LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> Electrical >> Charging Systems >> Charging System >> Generator >> Removal >> 5.7L
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Charging System: Generator: Removal: 5.7L

WARNING: DISCONNECT NEGATIVE CABLE FROM BATTERY BEFORE REMOVING BATTERY OUTPUT WIRE (B+ WIRE) FROM GENERATOR. FAILURE TO DO SO CAN RESULT IN INJURY OR DAMAGE TO ELECTRICAL SYSTEM.
  1. Disconnect negative battery cable at battery.
  2. Remove generator drive belt. Refer to COOLING for procedure.
  3. Raise and support vehicle.
  4. Unsnap plastic insulator cap from B+ output terminal.
  5. Remove B+ terminal mounting nut at rear of generator. Disconnect terminal from generator.
  6. Disconnect field wire connector at rear of generator by pushing on connector tab.
    Fig 1: GENERATOR SUPPORT BRACKET
    GC0015639Courtesy of DAIMLERCHRYSLER CORP.
  7. Remove generator support bracket nut (4) and bolt (3). Remove support bracket (1).
    Fig 2: GENERATOR
    GC0015638Courtesy of DAIMLERCHRYSLER CORP.
  8. Remove 2 generator mounting bolts (1).
  9. Remove generator (2) from vehicle.
scientia non olet · About LEMON Manuals