LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2005 >> 300 Base >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Restraints System (Service Information) >> Impact Sensor >> Removal >> Front Impact Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Impact Sensor

Fig 1: Front Impact Sensor Location
GC0016637Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect and isolate the battery negative cable.
    WARNING: Wait two minutes for the airbag system reserve capacitor to discharge before beginning any airbag system or component service. Failure to do so may result in accidental airbag deployment, personal injury or death.
    NOTE: If replacing the left front impact sensor, the air intake system needs to be removed (Refer to ENGINE/AIR INTAKE SYSTEM - REMOVAL) .
  2. Disconnect the electrical connector (3).
  3. Remove the two mounting screws (2).