Power Front Passenger Seat

NOTE: If the vehicle is equipped with a power front passenger seat, to remove the adjuster from the riser it is necessary to have battery power to move the seat forward and rearward to access the mounting bolts.

Fig 1: Removing/Installing Front Passenger Seat

Courtesy of DAIMLERCHRYSLER CORP.

Remove front passenger seat mounting bolts (Refer to BODY/SEATS/SEAT - REMOVAL) .

Fig 2: PASS SEAT MANUAL TRACK
Courtesy of DAIMLERCHRYSLER CORP.
Remove the adjuster to riser mounting bolt (3). For additional information (Refer to BODY/SEATS/SEAT RISER - REMOVAL) .
Disconnect and isolate the battery negative cable.
WARNING: Wait two minutes for the airbag system reserve capacitor to discharge before beginning any airbag system or component service. Failure to do so may result in accidental airbag deployment, personal injury or death.

Fig 3: Seat Weight Sensor
Courtesy of DAIMLERCHRYSLER CORP.
Remove the two nuts (2) holding the seat weight sensor (4) to the seat riser.
Disconnect the one electrical connector (1).