LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2005 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection >> O2 Sensor >> Installation >> Upstream O2
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Upstream O2

Fig 1: Removing/Installing Upstream O2 Sensor
GC0032360Courtesy of DAIMLERCHRYSLER CORP.
  1. Apply anti-seize compound to the threaded portion of the O2 sensor.
  2. Install the O2 sensor (1). Tighten to 50 N.m (37 ft. lbs.).
  3. Connect the O2 sensor harness connector.
  4. Install the engine cover. Align the engine cover retaining clips to the rubber mounts, and push down firmly to connect engine cover to rubber mounts.
    NOTE: To ease the installation of the engine cover, apply a small amount of lubricant to the engine cover rubber mounts.
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals