LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2005 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition System (Service Information) >> Camshaft Position Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Camshaft Position Sensor: Removal

Fig 1: Disconnecting/Connecting Camshaft Position Sensor Harness Connector And Removing Retaining Bolt
GC0034419Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect the negative battery cable.
  2. Disconnect the camshaft position sensor harness connector (1).
  3. Remove the retaining bolt (2).
  4. Remove the camshaft position sensor from the cylinder head.
scientia non olet · About LEMON Manuals