Knock Sensor: Removal

Fig 1: Disconnecting/Connecting Wire Harness Connectors At Knock Sensors

Courtesy of DAIMLERCHRYSLER CORP.

Remove the intake manifold from the engine. (Refer to ENGINE/MANIFOLDS/INTAKE MANIFOLD - REMOVAL) for 3.2L - Service Information or (Refer to ENGINE/MANIFOLDS/INTAKE MANIFOLD - REMOVAL) for 3.2L SRT - Service Information .
Disconnect the wire harness connectors at the knock sensors (1).
Remove the retaining bolts.
Remove the knock sensors from the engine block.