LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2005 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> Engine Performance >> System >> Emissions Control System >> Exhaust Gas RECIRCULATION Valve >> Exhaust Gas RECIRCULATION Tube >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Exhaust Gas RECIRCULATION Tube: Removal

Fig 1: Locating EGR Tube Flange Nut & Bolts
GC0033612Courtesy of DAIMLERCHRYSLER CORP.
  1. Remove the air cleaner housing.
  2. Remove the EGR tube mounting bolts (1) at the intake manifold.
  3. Remove the EGR tube flange nut (2) at the EGR valve.
  4. Remove the EGR tube.
  5. Clean the gasket surfaces on the EGR tube and intake manifold. Discard old gasket.
NOTE: Any loose dirt can lodge between the tube and manifold and cause vacuum leakage that will give a rough idle and reduced manifold vacuum.
scientia non olet · About LEMON Manuals