LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2005 >> PT Cruiser Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Occupant Restraint Controller >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Occupant Restraint Controller: Removal

  1. Open hood.
  2. Disconnect and isolate the battery negative cable.
  3. Wait two minutes for the system reserve capacitor to discharge before servicing any airbag components.
  4. Remove the center console.
  5. Remove ORC module mounting nuts and ground eyelet, then remove module. See Fig 1.
    Fig 1: Occupant Restraint Controller - Remove/Install
    GC0023007Courtesy of DAIMLERCHRYSLER CORP.
  6. Disconnect ORC 23-way connector.
  7. Remove ORC from vehicle.