LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2005 >> Pacifica Limited >> Repair and Diagnosis >> Brakes >> Traction Control >> Electronic Control Modules >> Body Control Module >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Body Control Module: Removal

  1. Disconnect and isolate the battery negative cable.
  2. Remove the lower instrument panel silencer.
  3. Remove the knee blocker airbag (Refer to ELECTRICAL/RESTRAINTS/KNEE BLOCKER AIRBAG - REMOVAL) .
  4. Unclip the 72-way bulkhead connector from the Body Control Module (BCM) mounting assembly.
  5. Move bulkhead wiring aside.
  6. Disconnect the five wire connectors from the BCM.
  7. Remove the four screws holding the BCM to the bulkhead. See Fig 1.
    Fig 1: BCM Mounting
    GC0000013Courtesy of DAIMLERCHRYSLER CORP.
    1 - PARKING BRAKE ASSEMBLY
    2 - BCM MOUNTING SCREWS
    3 - LOWER STEERING COLUMN
    4 - BODY CONTROL MODULE
  8. Remove the BCM from the mounting bracket.
scientia non olet · About LEMON Manuals