Ignition System (Service Information): Coil-Ignition: Installation: 2.7L

Fig 1: Removing/Installing Ignition Coil

Courtesy of DAIMLERCHRYSLER CORP.

1. Install ignition coil assembly to spark plug.
2. Install coil screws and tighten: 2.7L engine to 6.2 N.m (55 in. lbs.).
3. Connect the electrical connector and lock.
   Fig 2: Ignition Coils

   Courtesy of DAIMLERCHRYSLER CORP.
4. Install the intake manifold, (Refer to ENGINE/MANIFOLDS/INTAKE MANIFOLD - INSTALLATION)
5. Connect negative battery cable.