Ignition System (Service Information): Coil-Ignition: Installation: 3.5L

Fig 1: Removing/Installing Ignition Coil

Courtesy of DAIMLERCHRYSLER CORP.

On 3.5L engines, it is necessary to tighten the screws by alternating back and forth. Do not lose the spacers under the coil when installing ignition coils.

1. Install ignition coil assembly to spark plug.
2. Install coil screws and tighten 3.5L engines to 6.7 N.m (60 in. lbs.).
3. Connect the electrical connector and lock.
   Fig 2: Ignition Coils

   Courtesy of DAIMLERCHRYSLER CORP.
4. Install the intake manifold, (Refer to ENGINE/MANIFOLDS/INTAKE MANIFOLD - INSTALLATION)
5. Connect negative battery cable.