LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> 300 Base, 42RLE/VLP >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Restraints System (Service Information) >> Seat Belt And Retractor >> Removal >> Front
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Seat Belt And Retractor: Removal: Front

Fig 1: Front Seat Belt
GC0016660Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect and isolate the battery negative cable.
    WARNING: Wait two minutes for the airbag system reserve capacitor to discharge before beginning any airbag system or component service. Failure to do so may result in accidental airbag deployment, personal injury or death.
  2. Remove trim cover (3) from the seat cushion outboard trim cover.
  3. Remove seat belt (1) lower anchor nut (2) from seat cushion frame.
    Fig 2: Trim Cover
    GC0016633Courtesy of DAIMLERCHRYSLER CORP.
  4. Remove the upper turning loop (3) trim cover (2).
  5. Remove the upper turning loop retaining bolt (4).
    Fig 3: B-Pillar Trim
    GC0013497Courtesy of DAIMLERCHRYSLER CORP.
  6. Remove the lower B-pillar trim (Refer to BODY/INTERIOR/B-PILLAR TRIM - REMOVAL) .
    Fig 4: Front Seat Belt Web Guide
    GC0016657Courtesy of DAIMLERCHRYSLER CORP.
  7. Remove the one screw (2) to the front seat belt web guide (3).
    Fig 5: Seat Belt Tensioner
    GC0016661Courtesy of DAIMLERCHRYSLER CORP.
  8. Disconnect the tensioner (2) squib connector (3).
    Fig 6: Front Seat Belt Retractor
    GC0016662Courtesy of DAIMLERCHRYSLER CORP.
  9. Remove the one screw between the upper retractor indexing tabs in B-pillar.
  10. Remove the one front seat belt retractor (4) retaining bolt (3).
  11. Pull the retractor inboard and release the indexing tabs (2) from the B-pillar (1).
scientia non olet · About LEMON Manuals