LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Injection >> O2 Sensor >> Removal >> Upstream O2 Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Upstream O2 Sensor

Fig 1: Removing/Installing Upstream O2 Sensor
GC0032360Courtesy of DAIMLERCHRYSLER CORP.
NOTE: The left side O2 sensor is shown. The right side is similar.
  1. Disconnect the negative battery cable.
  2. Remove the engine cover. Grasp both corners of the engine cover, and pull up firmly.
  3. Disconnect the O2 sensor harness connector.
  4. Remove the O2 sensor (1).
scientia non olet · About LEMON Manuals