LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Restraints System (Service Information) >> Seat Belt Buckle >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Seat Belt Buckle: Removal

Fig 1: Identifying Seat Track Front Bolts
GC0035695Courtesy of DAIMLERCHRYSLER CORP.
  1. Move the seat to the full rearward position.
  2. Remove the seat track front bolts (1).
    Fig 2: Locating Seat Belt Bolt & Seat Track Rear Bolts
    GC0033331Courtesy of DAIMLERCHRYSLER CORP.
  3. Move the seat to the full forward position.
    NOTE: The seat track rear bolts are easily accessed when the seat back is tilted fully forward.
  4. Remove the seat track rear bolts (1).
  5. Remove the seat belt bolt (2) holding the seat belt to the seat.
  6. Tilt the seat back, to gain access to the bottom of the seat.
  7. Disconnect the power seat harness connectors.
  8. Carefully remove the seat from the vehicle.
    Fig 3: Locating Seat Belt Buckle Bolt
    GC0035667Courtesy of DAIMLERCHRYSLER CORP.
  9. Disconnect the seat belt buckle harness connector and remove the bolt (1) attaching the belt buckle to the seat.
scientia non olet · About LEMON Manuals