LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> Starter Motor >> Installation >> Installation - 2.7L
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation - 2.7L

  1. Install starter to transmission.
  2. Start the upper starter bolt.
  3. Start the lower bolt and snug it so that the starter will not move.
  4. Remove the upper bolt.
  5. Connect the battery cable and torque nut to 8.5 N.m (75 in. lbs.).
  6. Install the front mount bracket and check heat shield location.
  7. Install bolt the upper bolt and torque bolt to 54 N.m (40 ft. lbs.)
  8. Install the lower and torque bolt to 54 N.m (40 ft. lbs.)
  9. Install the front mount through bolt and torque bolt to 61 N.m (45 ft. lbs.)
  10. Install the O2 sensor and torque to 27 N.m (20 ft. lbs.)
  11. Lower vehicle.
  12. Connect the negative battery cable.
scientia non olet · About LEMON Manuals