LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Delivery >> Fuel Pump Module >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Pump Module: Installation

  1. Wipe seal area of tank clean and place a new seal in position in the tank opening.
  2. Position fuel pump in the tank.
  3. Position the lock ring over the fuel pump module.
  4. Tighten the lock ring using a brass punch and hammer.
  5. Connect the electrical connector.
  6. Connect the fuel line to the fuel pump.
  7. Install the fuel tank, refer to INSTALLATION .
  8. Lower vehicle.
  9. Connect the battery cable.
  10. Fill fuel tank. Use the DRB III® scan tool to pressurize the fuel system. Check for leaks.
scientia non olet · About LEMON Manuals