LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2006 >> Sebring GTC >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Delivery >> Fuel Tank >> Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation

  1. Position fuel tank on transmission jack.
  2. Raise tank into position and carefully work filler tube onto the fuel tank. A light coating of clean engine oil on the tube end may be used to aid assembly. Connect fuel filler tube hose and tighten clamp.
  3. Connect fuel pump/module electrical connector. Place retainer in locked position.
  4. Connect the EVAP, vapor, and vacuum lines.
  5. Lubricate the fuel supply line with clean 30 weight engine oil, install the quick connect fuel fitting. Refer to QUICK CONNECT FITTING .
  6. Attach filler vent line to filler tube. Pull on connector to make sure of connection.
  7. Place NVLD air filter under right rear tank strap before tightening.
  8. Tighten strap bolts to 54 N.m (40 ft. lbs.) torque. Remove transmission jack.
  9. Tighten filler hose clamp to 3.6 N.m (31.8 in. lbs.).
    CAUTION: Ensure straps are not twisted or bent before or after tightening strap nuts.
  10. Fill fuel tank, replace cap, and connect battery negative cable.
  11. Use the DRBIII® scan tool to pressurize the fuel system. Check for leaks.
scientia non olet · About LEMON Manuals