Mass Air Flow Sensor: Removal

Disconnect negative battery cable.
Remove the air pump assembly, (Refer to EMISSIONS CONTROL/AIR INJECTION/PUMP - REMOVAL) .
Remove 2 bracket mounting bolts. See Fig 1.

Fig 1: Mounting Bracket Bolts
Courtesy of DAIMLERCHRYSLER CORP.
Remove the bracket assembly. See Fig 2.

Fig 2: Remove/Install Assembly
Courtesy of DAIMLERCHRYSLER CORP.

Disconnect the electrical connector to MAF. See Fig 3.

Fig 3: Mass Air Flow Sensor

Courtesy of DAIMLERCHRYSLER CORP.

1 - Mass Air flow Sensor (MAF)

2 - Relay

2 - Inlet Filter

Twist the MAF sideways and remove from bracket. See Fig 4.

Fig 4: Removing/Installing Sensor From Bracket
Courtesy of DAIMLERCHRYSLER CORP.
Remove the rubber mounting.