Sensor - Manifold Absolute Pressure: Installation: 2.7L

Fig 1: Manifold Absolute Pressure Sensor Side View

Courtesy of CHRYSLER LLC

1. Clean MAP sensor mounting hole at intake manifold.
2. Check MAP sensor o-ring seal for cuts or tears.
   Fig 2: Turning Sensor 1/4 Turn

   Courtesy of CHRYSLER LLC
3. Position sensor into intake manifold.
   Fig 3: Manifold Absolute Pressure Sensor In Place

   Courtesy of CHRYSLER LLC
4. Rotate sensor 1/4 turn clockwise for installation.
   Fig 4: Sensor Location - 2.7L

   Courtesy of CHRYSLER LLC
5. Connect electrical connector to sensor.
6. Lock electrical connector.
7. Connect negative battery cable.