Steering System: Pump: Reservoir: Removal

Fig 1: Disconnecting/Connecting Battery Cables

Courtesy of CHRYSLER LLC

Disconnect and isolate battery negative cable (2) from battery post.
Siphon power steering fluid from pump reservoir.
Remove air cleaner housing and inlet tube to throttle body. Refer to REMOVAL .

Fig 2: Removing/Installing Remote Reservoir
Courtesy of CHRYSLER LLC
Remove hose clamp, then supply hose (3) at reservoir (2).
Remove hose clamp, then return hose (1) at reservoir (2).
Remove reservoir (2) from coolant bottle (4) by sliding it out of guide.