LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2007 >> Crossfire Base, 2D Convertible >> Repair and Diagnosis >> Engine Mechanical >> Fuel System >> Fuel Injection >> O2 Sensor >> Installation >> Downstream Oxygen Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Downstream Oxygen Sensor

Fig 1: Removing/Installing Downstream O2 Sensor
GC0032361Courtesy of CHRYSLER LLC
  1. Apply anti-seize compound to the threaded portion of the O2 sensor.
  2. Install the O2 sensor (1). Tighten to 50 N.m (37 ft. lbs.).
  3. Connect the O2 sensor harness connector.
  4. Lower the vehicle.
  5. Connect the negative battery cable.
scientia non olet · About LEMON Manuals