P0223-Accelerator Pedal Position Sensor Signal 2 Circuit High: Notes

Fig 1: Accelerator Pedal Position Sensor Circuit Schematic

Courtesy of CHRYSLER LLC

1. When Monitored  : With the ignition on and no other Accelerator Pedal Position (APP) Sensor 2 DTCs present.
2. Set Condition  : When APP Sensor Signal 2 voltage is too high. Engine will only idle if the brake pedal is pressed or has failed. Acceleration rate and engine output are limited.

For a complete Powertrain Control Module Circuit Diagram, refer to SCHEMATICS AND DIAGRAMS .