P0562-Battery System Low: Notes

Fig 1: Powertrain Control Module Power Circuits Schematic

Courtesy of CHRYSLER LLC

When Monitored : 180 seconds after the engine is started.
Set Condition : The voltage supply at the Powertrain Control Module (PCM) is less than 8 volts for at least 5 seconds.

Possible Causes

CHARGING SYSTEM

ENGINE CONTROL RELAY OUTPUT CIRCUIT OPEN

FUSED B(+) CIRCUIT OPEN

POWERTRAIN CONTROL MODULE

For a complete Powertrain Control Module Circuit Diagram, refer to SCHEMATICS AND DIAGRAMS .