LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2008 >> Crossfire V6-3.2L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Body and Frame >> Keyless Entry Module >> Service and Repair >> Sentry Key Remote Entry Module - Removal >> Sentry Key Remote Entry Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Sentry Key Remote Entry Module







REMOTE KEYLESS ENTRY MODULE





1. Disconnect the negative battery cable.
2. Remove the Instrument Cluster. Instrument Cluster - Removal.
3. Disconnect the 2-pin CAN BUS harness connector (1) from the SKREEM module.
4. Disconnect the 2-pin harness connector for the sentry key antenna ring.
5. Disconnect the 18-pin harness connector (1) from the SKREEM module.
6. Press the retaining tabs apart.
7. Remove the SKREEM module from the base plate.
scientia non olet · About LEMON Manuals