Rear Blower Motor Power Module - Description

DESCRIPTION





A rear blower motor power module is used on this model when it is equipped with the automatic temperature control (ATC) heating-A/C system. The blower motor power module is installed in the rear blower motor housing, which is located within the center floor console. The power module consists of a molded plastic mounting plate (1) with two integral wire harness connector receptacles. Concealed behind the mounting plate within the blower motor housing is the power module electronic circuitry and a large finned, heat sink (2). The module mounting plate is secured with two screws to the rear blower motor housing and is accessed for service by removing the front center floor console.