2.4L Turbo

Fig 1: THROTTLE CONTROL SHIELD

Courtesy of CHRYSLER LLC

Disconnect the negative battery cable.
Remove the throttle control shield.

Fig 2: THROTTLE CABLES
Courtesy of CHRYSLER LLC
Remove the throttle cables from the throttle body lever.

Fig 3: THROTTLE CABLE BRACKET
Courtesy of CHRYSLER LLC
Remove the throttle cable bracket and relocate.
Remove the spark plug cables from the ignition coil.
Unlock and disconnect the electrical connector from the ignition coil.

Fig 4: IGNITION COIL BOLT
Courtesy of CHRYSLER LLC
Remove bolts from ignition coil. Twist coil to remove 2 of the bolts from the coil before removing it from vehicle.

Fig 5: IGNITION COIL REMOVAL/INSTALLATION
Courtesy of CHRYSLER LLC
Rotate coil and tip upward.

Fig 6: IGNITION COIL REMOVED
Courtesy of CHRYSLER LLC
Pull coil up and out by the throttle body side of the intake manifold.