LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2009 >> Sebring Limited, 2D Convertible >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Control (Service Information) >> COIL, Ignition >> Installation >> 2.7L
April 5, 2026: LEMON Manuals is launched! Read the announcement.

COIL, Ignition: Installation: 2.7L

Fig 1: Removing/Installing Electrical Connectors And Mounting Bolts At Ignition Coil
GC0121029Courtesy of CHRYSLER LLC
  1. Align ignition coil with top of spark plug.
  2. Twist and push down ignition coil assembly onto spark plug and valve cover. Install mounting bolt (2) and tighten to 7.5 N.m (65 in. lbs.).
  3. Connect electrical connector (1) to ignition coil.
  4. Install upper intake manifold. Refer to INSTALLATION .
  5. Connect negative battery cable.
scientia non olet · About LEMON Manuals