LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2011 >> 300 Base, Gas >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Engine Cooling System >> Engine >> HEATER, Engine Block >> Installation >> 5.7L
April 5, 2026: LEMON Manuals is launched! Read the announcement.

HEATER, Engine Block: Installation: 5.7L

Fig 1: Heater, Exhaust And Bolt
GC0143810Courtesy of CHRYSLER LLC
  1. Thoroughly clean the cylinder block core hole and the block heater seat.
  2. Insert the block heater assembly (1) into the block.
  3. With the block heater fully seated, tighten bolt (1) to 2 N.m (17 in. lbs.).
  4. If equipped, install lower engine cover.
  5. Lower vehicle.
scientia non olet · About LEMON Manuals