Heated Seat Module - Installation

INSTALLATION

CAUTION: Properly align the Heated Seat Module (HSM) retaining tabs to the bracket, prior to engagement. Failure to follow these instructions may result in damage to the HSM.





1. Position the Heated Seat Module (HSM) (1) to the bracket (4) and engage the two front retaining tabs (2). Make sure the front retaining tabs are correctly engaged to the bracket.
2. Engage the rear HSM retaining tab (5). Make sure the rear retaining tab is fully engaged to the bracket.
3. Connect the electrical connectors (3) to the HSM.
4. Install the seat Front Seat - Installation
5. Reconnect the negative battery cable.
6. Verify proper heated seat system operation.