LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2012 >> 200 S, 2D Convertible >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Restraints System (Service Information) >> Sensor, Impact >> Removal >> Front Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Sensor

Fig 1: Removing/Installing Front Impact Sensor
GC0084280Courtesy of CHRYSLER GROUP, LLC
  1. Disconnect and isolate the battery negative cable.
    WARNING:

    Wait two minutes for the system reserve capacitor to discharge before servicing any airbag components. Failure to do this may result in serious or fatal injury.

  2. Remove the screw (4) that secures the front impact sensor (3) to the back of the right or left radiator support vertical member (2).
  3. Disconnect the electrical connector (1) from the sensor (3).
  4. Remove the front impact sensor from the engine compartment.
scientia non olet · About LEMON Manuals