LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2014 >> 200 S >> Repair and Diagnosis >> Engine Performance >> Ignition System (Service Information) >> Sensor, Camshaft Position >> Installation >> 2.4L Front
April 5, 2026: LEMON Manuals is launched! Read the announcement.

2.4L Front

Fig 1: Cam Sensor & O-Ring
GC0082375Courtesy of CHRYSLER GROUP, LLC
CAUTION:

Install camshaft position (CMP) sensor utilizing twisting motion. Make sure CMP sensor is fully seated. Do not drive CMP sensor into the bore with mounting screw. This may cause CMP sensor to be incorrectly seated causing a faulty signal or no signal at all.

  1. Lubricate the sensor O-ring.
    Fig 2: Front Cam Sensor Components Location
    GC0082374Courtesy of CHRYSLER GROUP, LLC
  2. Install the CMP sensor with mounting bolt tightened to 9 N.m (79.5 in. lbs.).
  3. Connect the electrical connector to the camshaft position sensor.
  4. Install the negative battery cable and tighten nut to 5 N.m (45 in. lbs.).
  5. Install the air cleaner to throttle body hose and connect the inlet air temperature sensor electrical connector.
scientia non olet · About LEMON Manuals