LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Chrysler >> 2014 >> 200 S >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Restraints System (Service Information) >> Module, Occupant Restraint Controller >> Removal >> Jumper Harness
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Jumper Harness

Fig 1: Removing/Installing ORC Jumper Harness
GC0122056Courtesy of CHRYSLER GROUP, LLC
  1. Open hood.
  2. Disconnect and isolate the negative cable from the battery. Wait two minutes for the system capacitor to discharge before further service.
    WARNING:

    Wait two minutes for the system reserve capacitor to discharge before servicing any airbag components. Failure to do this may result in serious or fatal injury.

  3. Remove the center console. Refer to HOUSING, SHIFTER, REMOVAL .
  4. Disconnect the ORC jumper harness (2) electrical connector at the ORC (4) and then the body harness (3).
scientia non olet · About LEMON Manuals