Conditions For Setting DTC

The O2S1 average transition time between .32 and .58 volt.
- For manual transaxle. lean to rich is greater than 65 milliseconds or rich to lean is greater than 60 milliseconds.
- For automatic transaxle, lean to rich is greater than 75 milliseconds or rich to lean is greater than 82 milliseconds
DTCs P0106, P0107, P0108, P0117, P0118, P0121, P0122, P0123, P0131, P0132, P0134, P0171, P0172, P0201, P0202, P0203, P0204, P0300, P0336, P0337, P0351, P0352, P0402, P0404, P0405, P0406, P0443, P0506, P0507, P1404, P1441, and P1627 are not set.
Closed loop stoichiometry.
1.5L SOHC
The Engine Coolant Temperature (ECT) is greater than 72°C (162°F).
The engine run time is greater than 120 seconds.
The purge duty cycle (D.C.) is greater than 0%.
The rpm is between 1600 and 4000.
The air flow is between 7 and 40 g/sec.
A 0 second delay after conditions met.
1.6L DOHC
The ECT is greater than 64°C (147°F).
The engine run time is greater than 60 seconds.
The purge D.C. is greater than 2%.
The rpm is between 1500 and 3500.
The air flow is between 9 and 28 g/sec.