LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Dodge and Ram >> 1982 >> Rampage Base, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Electronic Fuel Control >> Removal & Installation >> Duty Cycle Solenoid >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Duty Cycle Solenoid: Removal

  1. Remove 2 duty cycle solenoid retaining screws and gently lift solenoid from air horn. See Figure. Remove anti-rattle spring, 2 retaining screws and idle solenoid from carburetor.
  2. Remove 2 wide open throttle cut-out switch mounting screws (if equipped). Mark location for proper assembly. Remove harness mounting screws and open retaining clip. Remove wires from connector and thread through clip.
scientia non olet · About LEMON Manuals